Pressure Gauge
Twin Gauge Console
Mini Gauge (Straight)
Available in Bar & PSI, fits first stage HP port.
CE approved (EN250)
Pressure Gauge (Brass)...
Brass pressure gauge in TPR rubber boot with an 81cm (32 inches) rubber hose, The gauge features a bright phosphorescent face for easy readability in any condition. This gauge displays BAR, up to a maximum of 350 BAR.
Scuba Air 3 2nd Stage
This is an integrated secondary 2nd Stage (octopus), and BCD power inflator. It allows you to combine the two items, and reduce the hoses/2nd stage from your regulator setup; to help improve streamlining. It also features a built-in underwater/surface signaling device, similar to the Sub...
RG-6000 Octopus (Right hand)
The RG-6000 is a high performance secondary 2nd stage (Octopus), featuring a compact/flat design to improve diver streamlining. This second stage is designed to fit onto Aquatec PI-208 & PI-230 inflators, it provides excellent breathing at all recreational diving depths.
RG-6000 Octopus (Left hand)
The RG-6000 is a high performance secondary 2nd stage (Octopus), featuring a compact/flat design to improve diver streamlining. This second stage is designed to fit onto Aquatec PI-208 & PI-230 inflators, it provides excellent breathing at all recreational diving depths.
RG-4100F 1st Stage
The Aquatec RG-4100F is a balanced diaphragm design 1st stage, offering a consistent airflow independent of depth/tank pressure. This is a compact 1st stage featuring two high-pressure ports, and four low-pressure ports; with an intermediate pressure of 9.5~10.2 BAR.
Designed for...
RG-3100S 2nd Stage
The RG-3100S is an adjustable 2nd stage, the pneumatically balanced design gives consistent gas flow at all times. Featuring a Venturi assist to produce a smooth inhalation, and a dive/pre dive lever to help avoid free flows on the surface.
The adjustable design allows the diver to...
RG-3100F 1st Stage
The Aquatec RG-3100F is a piston based 1st stage, with a time-tested design for demanding conditions. This is the 1st stage of choice for a rental regulator, it comes factory cleaned and ready for up to 40% Nitrox. A simple design, easy to maintain and great value.
The 1st stage...
RG-2100S 2nd Stage
The RG-2100S is a non-adjustable 2nd stage, suitable for either a primary or secondary 2nd stage. The front cover of the 2nd stage is user changeable and available in 6 different colors (Green, Blue, Purple, Orange, Red, Yellow).
The RG-2100S comes supplied with a 75cm (29 inches)...
RG-2100F 1st Stage
The Aquatec RG-2100F is a diaphragm design 1st stage, offering a consistent airflow independent of depth/tank pressure. This is a compact 1st stage featuring two high-pressure ports, and four low-pressure ports; with an intermediate pressure of 9.5~10.2 BAR. CE Approved and manufactured from...